Tailor tacks demystified

Tailor Tacks demystified!

This is a stitch used to transfer information from a paper pattern to the fabric.

On a commercial pattern you will see little circles within the pattern piece. These mark where a tailor tack should be made.

 

imageYou can use tailor tacks as a temporary way of marking fabric to show dart positions, pleats, pocket positions, gathering positions and fold lines to name a few.

How to tailor tack Once you have cut out the pattern piece, keep the pattern pinned to the fabric.

image

 

 

Using a double thread, about the length of your arm and in a contrasting colour, thread your needle.

Plunge the needle into 1 side of the circle,check you go through all the layers.

image

Leave a tail about the length of your finger on top and gently pull the thread through.

image      image

 

image

You are now going to repeat the stitch and create a loop, leaving the loop the length of your finger. Bring the needle back up again and cut the thread leaving a tail the length of your finger.

image  image

Cut through the loop.

image  image

Peel the paper pattern away from the fabric. Carefully separate the fabric layers and snip the threads in between.

image  image

You should now have a thread mark on both layers of your fabric pattern piece. Ta dah! Please do leave feedback if you have any comments and, as always, remember that sewing is good for the soul xx

Leave a Comment

*